Tel: +86-371-86151827

5 percent aluminum alloy coated steel sheet

Steel grade:5 percent aluminum alloy coated steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

5 percent aluminum alloy coated steel sheet Introduction

ASTM A 875/A 875M—06 Standard Specification for Steel ...

ASTM A 875/A 875M—06 Standard Specification for Steel Sheet Zinc-5 percent, Aluminum Alloy-coated by the Hot-dip Process (PDF Download) Skip to the end of the images gallery Skip to the beginning of the images gallery

Buy 5% Aluminum zinc Alloy Coated Steel Sheet

Buy 5% Aluminum zinc Alloy Coated Steel Sheet: Copper and Alloy - Resistance Seam Welding Wheel … Copper and Alloy We are a leading Manufacturer of resistance seam welding wheel, gunmetal products, aluminum bronze, cadmium copper c16200 (cucd1), naval brass c46400 and ...[PDF]

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade …

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade Data Sheet 55% Aluminum-Zinc Alloy Coated Steel - hot-dip aluminum & zinc alloy coated structural steel

ASTM A875/A875M—13 Standard Specification for Steel …

1.1 This specification covers steel sheet, in coils and cut lengths, metallic-coated by the hot-dip process, with zinc-5 % aluminum alloy coating. The Zn-5Al alloy coating also contains small amounts of elements other than zinc and aluminum that are intended to improve processing and the characteristics of the coated product.

JSA - JIS G 3317 - Hot-dip zinc-5 % aluminium alloy-coated ...

Hot-Dip Zinc - 5 Percent Aluminium Alloy-Coated Steel Sheets and Coils A description is not available for this item. JIS G 3317. March 20, 2005 Hot-Dip Zinc - 5 Percent Aluminium Alloy-Coated Steel Sheets and Coils A description is not available for this item. ...[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Hot-dip 55% aluminum-zinc alloy-coated steel sheet and strip ALSHEETTM Hot-dip aluminum-coated steel sheet and strip ECOKOTETM-S Sn-Zn coated steel sheet and strip ... Coated Steel Sheets of Nippon Steel & Sumitomo Metal Corporation weldability, paintability, and various other properties as

Standard Specification for Steel Sheet, Zinc-5 % Aluminum ...

A875 / A875M-13 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process coating weight~ formability~ hot-dip galvanizing~ steel sheets~ zinc-aluminum alloy-coated steel sheets~ zinc-aluminum-mischmetal alloy-coated steel sheets~

Galfan zinc-aluminium alloy coating (ZA) - SSAB

Forming[DOC]

Sheet Metal Gutters and Downspouts - Sweets

· Web viewASTM A792: Standard Specification for Steel Sheet, 55 percent Aluminum Zinc Alloy Coated by the Hot Dip Process. ASTM A924: Standard Specification for General Requirements for Steel Sheet, Metallic Coated by the Hot Dip Process. ASTM B370: Standard Specification for Copper Sheet and Strip for Building Construction.[PDF]

ASTM COATING WEIGHT DESIGNATION OF COATED …

ASTM COATING WEIGHT DESIGNATION OF COATED SHEET STEEL FOR CONSTRUCTION APPLICATIONS TBP 2012.4 ... for metal coated sheet steel, including all the types discussed below. ASTM A 924 ... (HDGA), zinc-5% aluminum alloy-coated (GALFAN 2 Coated Steel), and Type 2 aluminum-coated steel. These are all hot-dipped coatings applied in a

JSA - JIS G 3318 - Prepainted Hot-Dip Zinc - 5 Percent ...

This Japanese Industrial Standard specifies the prepainted hot-dip zinc-5 % aluminium alloy-coated steel sheet and strip (hereafter referred to as "sheets and coils"), produced by applying a uniform...

Aluminized steel - Wikipedia

Aluminized steel is steel that has been hot-dip coated on both sides with aluminium-silicon alloy. This process assures a tight metallurgical bond between the steel sheet and its aluminium coating, producing a material with a unique combination of properties possessed neither by steel nor by aluminium alone.Types·

Metal Types | Metal Coaters

Carbon steel sheet coated with zinc on both sides then subjected to an in-line heat treatment that converts entire coating to a zinc-iron alloy. The Galvannealed surface has a non-spangled matte finish appearing similar to uncoated cold rolled steel. Galvalume: A metal substrate consisting of cold rolled steel coated with a metallic coating of ...

aluminium zinc alloy coated steel coil

Zinc-Magnesium Coated Steel Sheets· PDF 5 Tailored Properties Zinc (Z) as a coating consists of about 99 per cent zinc and was first employed for corrosion protection of sheet steel in 1959. Aluminium-silicon coatings (AS), using an aluminium alloy containing about ten per cent …

Metal Types | Metal Coaters

Carbon steel sheet coated with zinc on both sides then subjected to an in-line heat treatment that converts entire coating to a zinc-iron alloy. The Galvannealed surface has a non-spangled matte finish appearing similar to uncoated cold rolled steel. Galvalume: A metal substrate consisting of cold rolled steel coated with a metallic coating of ...

Standard Specification for Steel Sheet, Zinc-5% Aluminum ...

1.1 This specification covers steel sheet, in coils and cut lengths, metallic-coated by the hot-dip process, with zinc-5 % aluminum alloy coating. The Zn-5Al alloy coating also contains small amounts of elements other than zinc and aluminum that are intended to improve processing and the ...[PDF]

ALUMINIZED STEEL Grade Data Sheet - Cascadia Metals

ALUMINIZED STEEL Grade Data Sheet Aluminized Steel - hot-dip aluminum & silicon alloy coated structural steel with guaranteed ... Steel base Guaranteed Typical Range Guaranteed Maximum Percent Longitudinal tensile Carbon (C) 0.20 Yield strength, minimum ksi 33 33-51 Phosphorus (P) 0.40 Tensile strength, minimum ksi 45 45-64 Manganese (Mn) - ...

ZINCALUME® | Bluescope Thailand

ZINCALUME® steel is a metallic coated sheet steel which has an alloy coating composed of 55 percentage aluminium, 43.5 percentage zinc and 1.5 percentage silicon. As a result of extensive technical research, ZINCALUME® steel is a superior coated steel, which can be used in a wide range of building and manufacturing applications that provides ...[PDF]

2012 IBC ASTM Standards - shop.iccsafe.org

Coil-coating Process for Exterior Exposed Building Products A 792/A 792M—08 Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated by the Hot-dip Process A 875/A 875M—06 . Standard Specification for Steel Sheet Zinc-5 percent, Aluminum Alloy-coated …

Standards - Continental Steel & Tube Company

Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

ZAM® - Zinc, aluminum and magnesium alloy coated steel

Wheeling-Nisshin is proud to announce our newest product, ZAM ® - branded the "Corrosion protection of the 21 st Century". ZAM ® is a remarkably superior corrosion-resistant hot-dip Zinc-Aluminum-Magnesium alloy coated steel sheet product. Wheeling-Nisshin is the first company in the Americas to produce such a product.[PDF]

ZINCALUME Steel Grade 33 Grade Data Sheet - …

ZINCALUME® Steel Grade 33 Grade Data Sheet General Description ZINCALUME® Steel Grade 33 - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 33 ksi with good ductility. Typical Uses Roll-formed roofing and siding.

Aluminized steel - Wikipedia

Aluminized steel is steel that has been hot-dip coated on both sides with aluminium-silicon alloy. This process assures a tight metallurgical bond between the steel sheet and its aluminium coating, producing a material with a unique combination of properties possessed neither by steel nor by aluminium alone.Types·

Galvanneal coatings versus galvanize coatings ...

The continuous hot-dip coating process for steel sheet products—like the door on the left—is widely used and employed in all corners of the globe. Most users of continuously hot-dip coated zinc-coated steel sheet (i.e. galvanize) think of it as a product with a bright, silvery metallic sheen.

AASHTO M 36 - Standard Specification for Corrugated Steel ...

Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. The steel sheet used in fabrication of the pipe has a protective metallic coating of zinc (galvanizing), aluminum Type 2, 55 percent aluminum-zinc alloy, zinc-5 percent aluminum-mischmetal alloy, or aluminum Type 1.

Scope Information: Stainless Steel Sheet And Strip In ...

stainless steel sheet and strip in coils. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than 9.5 mm in width and less than 4.75 mm in thickness, and

Aluminum Sheet & Plate

Painted Aluminum: 1100, 3003, 3105, 5005 and 5052 are just some of common alloys available in painted product.Painted aluminum is produced in a broad range of mechanical properties and the spectrum of finishes includes high durability exterior coatings, specialized epoxies, polyesters, textured polyesters, fluorocarbons and metallics as well as wash coat primers.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.