Tel: +86-371-86151827

wear resistant carbon steel plates of nm400

Steel grade:wear resistant carbon steel plates of nm400

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

wear resistant carbon steel plates of nm400 Introduction

NM400 wear/ abrasion resistant steel plate with improved ...

An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively. The impact test was carried out with an instrumented impact tester.

wear resistant steel plate nm400 - hopkinsplasticsurgery

wear resistant steel plate nm400: A36 steel plate ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel ...

steel price of NM400 tensile,steel plate price,where to ...

NM400 wear/ abrasion resistant steel plate with improved ...NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa.An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

wear resistant carbon steel plates of nm400 - cafethuys.nl

NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa.An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

NM400 wear/ abrasion resistant steel plate with improved ...

NM400 steel plate. HOME > products. NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa. An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

Wear Resistant Steel Plate - steelplatecuttingpart

NM400 wear-resistant steel plate is widely used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery and other products. Excavator, loader, bulldozer bucket board, blade plate, side blade plate, blade.

Cutting of Wear Resistant Steel Plate NM400

NM400 wear-resistant plates are heat-treated and tempered steel plates, so most of them have been cut by plasma or other cutting methods. Flame cutting is to cut the wear plate with high temperature oxygen, so the flame cutting process will have a heat affected zone on the wear plate.

Wear resistant steel plate AR360, AR400, AR500, NM360 ...

Wear Resistant Steel Plate. For the production of all kinds of plastic mold, high mirror mold, mold and so on. All kinds of engineering machinery, equipment wear parts. NM360 ≤0.17 ≤0.50 ≤1.5 ≤0.025 ≤0.015 ≤0.70 ≤0.40 ≤0.50 ≤0.005 NM400 ≤0.24 ≤0.50 ≤1.6 ≤0.025 ≤0.015 0.4~0.8 0.2~0.5 0.2~0.5 ≤0.005 NM450 ≤0.26 ≤0.70 ≤1.60 ≤0.025...

wear resistant carbon steel plates of nm400 - cafethuys.nl

NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa.An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

steel price of NM400 tensile,steel plate price,where to ...

NM400 wear/ abrasion resistant steel plate with improved ...NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa.An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

wear resistant carbon steel plates of nm400

NM400 wear/ abrasion resistant steel plate with improved ...NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa.An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

Wear Resistant Steel Plate - steelplatecuttingpart

NM400 is a high strength wear-resistant steel plate. NM400 has quite high mechanical strength. Its mechanical properties are 3 times to 5 times that of ordinary low alloy steel plates, and it can significantly improve the wear resistance of mechanical parts.

Nm400 Hot Rolled Abrasion Wear Resistant Steel Plate

Steel Plate, Wear Plate, Wear Resistant Steel Plate manufacturer / supplier in China, offering Nm400 Hot Rolled Abrasion Wear Resistant Steel Plate, Factory Direct Sell Carbon Checkered Steel Plate, Q235 Carbon Steel Checkered Sheet From China and so on.

8-100mm Wear Resistant Steel Plate NM400,NM500,AR400 ...

Abrasion Resistant Steel Plate (Abrasion Resistant) Steel Plate is used in the manufacture of numerous products; Conveyors, Chutes & Liners and Aggregate Containers are a few examples of uses for this material. Typically, this steel plate is made in the as-rolled condition. Hardening agents such as carbon and manganese are used in the make-up ...

wear resistant steel plate nm400 - hopkinsplasticsurgery

wear resistant steel plate nm400: A36 steel plate ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel ...

Buy Hot Rolled Alloy Plates Nm400 - cafethuys.nl

Buy Hot Rolled Alloy Plates Nm400 - gofschools.orgNM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa.An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

China Xar400 Nm400 Ar400 Wnm400 Hardface Heat Wear ...

China Xar400 Nm400 Ar400 Wnm400 Hardface Heat Wear Resistant Plate, Find details about China Steel Products, Steel Plate from Xar400 Nm400 Ar400 Wnm400 Hardface Heat Wear Resistant Plate - WUGANG CHANG YU LONG INDUSTRY AND TRADE CO., LTD.

Nm360, Nm400, Nm500 Wear Abrasion Resistant Steel Plate …

Steel Plate, Wear Resistant Steel Plate, Wear Plate manufacturer / supplier in China, offering Nm360, Nm400, Nm500 Wear Abrasion Resistant Steel Plate in China, Hot Dipped Galvanized Corrugated Roofing Steel Sheet, High Strength Galvanized Corrugated Roofing Steel Sheet and so on.

Nm400 Steel Plate - gofschools.org

Abrasion Resistant Steel Plate-WZB . WNM-Abrasion Resistant Steel Plate. WZB-NM360, WZB-NM400, WZB-NM500, WZB-NM500, WZB-NM550 are steel grades of wear steel plate made of Wugang, which is used for high wear and high impact applications, it can also be used as high strength structural steel with yield strength larger than 800MPa.

China High Strength Abrasion Resistant Steel Plate Nm400 ...

China High Strength Abrasion Resistant Steel Plate Nm400, Find details about China Abrasion Resistant Steel Plate Nm400, Wear Resistant Steel Sheet from High Strength Abrasion Resistant Steel Plate Nm400 - Tianjin Tiangang Weiye Steel Tube Co., Ltd.

Cutting of Wear Resistant Steel Plate NM400

NM400 wear-resistant plates are heat-treated and tempered steel plates, so most of them have been cut by plasma or other cutting methods. Flame cutting is to cut the wear plate with high temperature oxygen, so the flame cutting process will have a heat affected zone on the wear plate.

Hardox® wear plate- Wear and abrasion resistant steel - SSAB

Originally intended as wear plate, it turns out that Hardox® steel can act as a load-carrying part in many applications due to its unique combination of hardness and toughness. With Hardox® wear plate, you can design structures that are wear-resistant, strong and lightweight, all at the same time.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.