Tel: +86-371-86151827

a203 gr b steel plate specification

Steel grade:a203 gr b steel plate specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a203 gr b steel plate specification Introduction

Boiler steel plate A203 Grade B,A203-B ASTM specification

Steel Name:A203 Grade B Boiler steel plate,A203 Grade B Pressure vessel steel plate Steel Grade:A203 Grade B Steel Standard: ASTM A203/A203M Thickness:6mm-450mm Width:1200mm-4200mm Length:3000mm-18000mm Surface Treatment:Shot blasting and painting or coated Main application of ASTM A203 Grade B are used to build boilers and pressure vessels ...[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 3 ASTM Specifications continued SPECIFICATION A203 Grade A A203 Grade B A203 Grade D A203 Grade E A203 Grade F Type of Steel Alloy Alloy Alloy Alloy Alloy Requirements for Delivery A20 A20 A20 A20 A20 Tensile Strength (ksi) 65/85 70/90 65/85 70/90 80/100 to 2" incl.; 75/95 over 2" Yield ...

Standard Specification for Pressure Vessel Plates, Alloy ...

This specification covers nickel-alloy steel plates intended primarily for welded pressure vessels. As a steel making practice, the steel shall be killed and shall conform to fine grain size requirements. The heat treatment requirements for all plates are presented, and all plates under Grades A, B, D, and E shall be normalized as required.

ASTM A203 Grade B|A203 Gr.B|A203GrB|STEEL PLATE__Steel ...

ASTM A203 Grade B steel grade is a nickel alloy steel plate in welded pressure vessels. For this A203 Grade B is max thickness in 150mm and the element of nickel is 2.25% to be used in manufacturing pressure vessel and boilers. ASTM A203 Grade B is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

SA203 Grade B specification - MS Plates - napmr.org

Alloy Steel Plate Astm A203 a203m Gr.b. Boiler steel plate A203 Grade B,A203-B ASTM specification. than A203 Grade A pressure vessel steel plate at 255 Mpa,and tensile strength shall be above 480 Mpa for steel plate SA203 Grade B.Ultrasonic examination for pressure vessel steel plate A203 Grade B,there are A 435/A 435M,A 577/A 577M,A 578/A 578M ...

(S)A203 Grade E (S)A203 Grade F Pressure vessel steel ...

Pressure vessel used nickel alloy steel plate SA203 Grade E,A203 Grade E,SA 203 Grade F and A203 Grade F are under steel specification ASTM A 203/A 203M and ASME SA 203/SA 203M.For pressure vessel steel plate A203 Grade E,the heat treatment shall be done as Normalized,when customers accept,tempering last more than half an hour is also Ok when ...

A203 Grade F specification - MS Plates - napmr.org

Steel standard ASTM A204/A204M and similar steel standard ASME SA204/SA204M which specification for pressure vessel steel plates,molybdenum steel plate,S/A203 Grade B steel plate,S/A203 Grade D alloy steel plate,S/A203 Grade E pressure vessel steel plate,S/A203 Grade F steel plate,S/A204 Grade A boiler steel plate,S/A204 Grade B pressure

ASTM specification A203 Grade E,A203-E Boiler steel plate

Steel Name:A203 Grade E Boiler steel plate,A203 Grade E Pressure vessel steel plate Steel Grade:A203 Grade E Steel Standard: ASTM A203/A203M Thickness:6mm-450mm Width:1200mm-4200mm Length:3000mm-18000mm Surface Treatment:Shot blasting and painting or coated Main application of ASTM A203 Grade E are used to build boilers and pressure vessels ...

SA203 Grade B specification - MS Plates - napmr.org

Alloy Steel Plate Astm A203 a203m Gr.b. Boiler steel plate A203 Grade B,A203-B ASTM specification. than A203 Grade A pressure vessel steel plate at 255 Mpa,and tensile strength shall be above 480 Mpa for steel plate SA203 Grade B.Ultrasonic examination for pressure vessel steel plate A203 Grade B,there are A 435/A 435M,A 577/A 577M,A 578/A 578M ...

(S)A203 Grade E (S)A203 Grade F Pressure vessel steel ...

Pressure vessel used nickel alloy steel plate SA203 Grade E,A203 Grade E,SA 203 Grade F and A203 Grade F are under steel specification ASTM A 203/A 203M and ASME SA 203/SA 203M.For pressure vessel steel plate A203 Grade E,the heat treatment shall be done as Normalized,when customers accept,tempering last more than half an hour is also Ok when ...

prime quality A203 Grade D grade Specs-BBN STEEL …

A203 grade D,A203 Gr D,ASTM A203GrD,A203 Grade D steelA203 Grade D steel grade is a nickel alloy steel plate in welded pressure vessels. For this A203 Grade D is max thickness in 100mm and the element of nickel is 3.25% to be used in manufacturing pressure vessel and boilers.

A204 Grade B STEEL PLATE-S355J2,S35J2G3,S355JR,S235JR ...

A204 Grade B STEEL PLATE 2013年7月15日 by admin . ASTM A204 standard specification for Pressure Vessel Plates, Alloy Steel, Molybdenum .. ASTM A204 Grade B is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

Alloy Plate Astm A203 Grade B - gmatindia.in

A203 Grade B,A203GrB - Mild steel plate,shipbuilding steel ... A203 Grade B boiler steel plate with minimum yield strength at 275 Mpa,higher than A203 Grade A pressure vessel steel plate at 255 Mpa,and tensile strength shall be above 480 Mpa for steel plate SA203 Grade B.Ultrasonic examination for pressure vessel steel plate A203 Grade B,there are A 435/A 435M,A 577/A 577M,A 578/A 578M …

ASTM A203 Grade E Steel plate,ASTM A203 Grade E alloy ...

ASTM A203 has five grades or levels-- Grade A/B/D/E/F. ASTM A203 Grade E steel grade is a nickel alloy steel plate in welded pressure vessels,A203 Grade E is used in fabricators serving industry, especially in the oil, gas and chemical supply markets.

ASTM A203 Low Alloy Steel, Grade D - MatWeb

Low Alloy Steel, Grade D, Nickel alloy steel plate Pressure vessel quality. Advertise with MatWeb! Data sheets for over 130,000 metals, plastics, ceramics, and composites. HOME ... ASTM A203 Low Alloy Steel, Grade D (discontinued **) Categories: Metal; Ferrous ...

Alloy Plate Astm A203 Grade B - hopkinsplasticsurgery

Alloy Plate Astm A203 Grade B: Products / Low Alloy High Strength Steel__Steel Supplier. ... S355J2,S35J2G3,S355JR,S235JR Stock Steel Plate-Steel … If you need more steel grade and size in steel stock, please A516GR70 STEEL PLATE WAREHOUSE steel to find in our warehouse stock list. ... or read online for free. Equivalent ASTM with JIS , BS ...

ASTM A203 Steel Plates, Thickness: 3-4 Mm, Rs 200 ...

Aesteiron Steels LLP - offering ASTM A203 Steel Plates, Thickness: 3-4 Mm at Rs 200/kilogram in Mumbai, Maharashtra. Get best price and read about company and get contact details and address. | …

ASTM A203 Steel Plate - Gangsteel

ASTM A203 Grade A steel grade is a nickel alloy steel plate in welded pressure vessels. For this A203 Grade A is max thickness in 150mm and the element of nickel is 2.25% to be used in manufacturing pressure vessel and boilers.[PDF]

Steel plate Material comparision - ansonsteels

09Mn2VR A203-GrA.B TTST41V TTST35V ... Grade Carbon Steel Plate Low Content Alloy Steel Plate Heat-resisting Steel Plate Low Temper-ature Resistant Steel Plate Stainless Acid-resisting Steel Plate Mark Mark Standard Number Specification Standard Number Material . 0Cr18Ni12Mo2Ti SUS316 G4304 G4305 A320-316 0Cr18Ni12Mo3Ti SUS317 G4304 G4305 A320 ...

Alloy Steel Plates, Plate Sheets, Plate Sheets Exporter

astm a203 grade a astm a203 grade b astm a203 grade d astm a203 grade e astm a203 grade f astm a204 (standard specification for pressure vessel plates alloy steel molybdenum) astm a204 grade a astm a204 grade b astm a204 grade c astm a225 (standard specification for pressure vessel plates alloy steel manganese vanadium nickel) astm a204 grade c

ASTM A204 Grade B|A204 Gr.B STEEL PLATE__Steel Supplier

ASTM A204 standard specification for Pressure Vessel Plates, Alloy Steel, Molybdenum . ... Mechanical Property of A203 Grade A steel plate. A204 Grade B. Tensile strength, kis [MPa] 70-90 [485-620] ... Gangsteel is specialized in supplying ASTM A204 steel plate in A204 Grade B,A204 Grade A,A204 Grade C,and.

Alloy Steel Plate Astm A203 Grade B

A203 Gr B|A203GrB steel plate__Steel Supplier. ASTM A203 Grade B steel grade is a nickel alloy steel plate in welded pressure vessels. For this A203 Grade B is max thickness in 150mm and the element of nickel is 2.25% to be used in manufacturing pressure vessel and boilers. Steel Plate ASTM A203/A203M Grade F, Grade E, Grade D ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.