Tel: +86-371-86151827

astm a517 gr f steel plate property

Steel grade:astm a517 gr f steel plate property

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a517 gr f steel plate property Introduction

ASTM A517 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

Standard Specification for Pressure Vessel Plates, Alloy ...

ASTM A517 / A517M-17, Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered, ASTM International, West Conshohocken, PA, 2017, astm.org Back to …

ASTM A517 Grade F|A517 Gr.F|A517GrF|STEEL PLATE__Steel ...

ASTM A517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. The steel shall be killed and shall conform to the fine austenitic grain size requirement of Specification A20/A20M.

ASTM A517 Grade B F Steel Properties/ASME SA517

Tensile properties of the steel plate shall meet the specified values for tensile strength, yield strength, and elongation. The material shall undergo mechanical tests such as tension test and transverse Charpy V-notch impact test.ASTM A517/A517M standard main steel grade:ASTM A517 Grade A,B,E,F,P,H,Q

ASTM A517 steel,ASTM A517 steel steel plate,ASTM A517 ...

ASTM A517 steel mechanical property: A 517 gr50/55/60/65/70/80 steel plate is one mainly of High yield strength cold forming steels, A 517 gr50/55/60/65/70/80are mainly used for manufacturing pressure vessels and tanks.For improving steel property and using in special surroundings,steel grade A517 Grade A and A517 Grade B both contain some alloy elements,such as …

ASTM A517 Low Alloy Steel, Grade F - MatWeb

SA517, Steel plate, quenched and tempered High tensile strength Pressure vessel quality. Advertise with MatWeb! Data sheets for over 130,000 metals, plastics, ceramics, and composites. ... ASTM A517 Low Alloy Steel, Grade F Categories: Metal; Ferrous Metal; Alloy ...

ASTM A517 Grade B,A517 Grade B,A517 Grade B,steel plate ...

A517 Grade B steel plate A517 Grade B is a high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. ... Mechanical Property A517 Grade B. A517 Grade B. 65mm and under. Tensile strength, kis [MPa] ... ASTM A517 Grade E,A517 Grade E,A517 Grade E,steel plate,A517 Gr E » ...

ASTM A517 Grade F high tensile alloy steel plates,ASTM ...

ASTM A517 Grade F in the standard A517/A517M is a kind of high tensile alloy steel plates material used to fabric high temperature pressure vessels. ASTM A517 have six grades or levels. They are : Grade A, Grade F, grade E, grade F, grade J , grade P. ASTM A517 Grade F need to be done the (Quenching + Tempering ) heat-treatment to meet the property requirement in the standard ASTM A517.

Plate Typical Properties - Cardinal Metals – Steel Yard ...

Plate Typical Properties. PLATES TYPICAL PROPERTIES. Types: Condition of Steel: Tensile Strength ksi: ... PRESSURE VESSEL QUALITY ALLOY T-1 PVO ASTM A517, ASME SA517 GRADE F: Q & T: ASTM A387, ASME SA387 Grade 11: Ann: ASTM A387, ASME SA387 Grade 22: N & T: INTERMEDIATE CARBON AISI 1045: As Rolled:

ASTM A517 Grade B F Steel Properties/ASME SA517

Tensile properties of the steel plate shall meet the specified values for tensile strength, yield strength, and elongation. The material shall undergo mechanical tests such as tension test and transverse Charpy V-notch impact test.ASTM A517/A517M standard main steel grade:ASTM A517 Grade A,B,E,F,P,H,Q

ASTM A517 Gr.F steel material equivalent-BBN STEEL sale ...

ASTM A514 Steel, grade F, plate thickness 19 - 64 mm. UNS K11576, ASTM A517 F, ASTM A592 F, Low-alloy steel The following are suggested consumables for arc welding processes: For 0.476 - 6.35 cm (3/16 - 2.5 in.) thicknesses - Manual Shielded Metal-Arc …

ASTM A517 Grade F high tensile alloy steel plates,ASTM ...

ASTM A517 Grade F in the standard A517/A517M is a kind of high tensile alloy steel plates material used to fabric high temperature pressure vessels. ASTM A517 have six grades or levels. They are : Grade A, Grade F, grade E, grade F, grade J , grade P. ASTM A517 Grade F need to be done the (Quenching + Tempering ) heat-treatment to meet the property requirement in the standard ASTM A517.

ASTM A517 - EPC Steel and Processing Co., Ltd.

epcsteel› Steel Plate› Pressure Vessel Steel PlateASTM A517 steel plate is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and pressure vessels. ... ASTM A516 Grade 70. ASTM A516 Grade 70. June 11th, 2017. ASTM A387. ASTM A387. June 11th, 2017. ASTM A285. ASTM A285. June 11th, 2017. Search the keyword.

cheap A517 Gr.F grade property-BBN STEEL Pressure Vessel ...

Henan BEBON Hot Sale Pressure Vessel Steel Plate-A285 ...A841 Gr.B cheap pressure vessel plate property; SA387 Gr22 China pressure vessel plate price; ... A517 Grade S prime quality pressure vessel plate factory; ... ASTM A517 Gr.F pressure vessel plate dealer... A302 Gr.B cheap pressure vessel plate application;

A517 Grade F,A517GrF,A517GrF PLATE - Mild steel plate ...

Pressure vessel steel plate ASTM A517 Grade F owned high yield strength and tensile strength.For the thickness equal and belows 65mm of High strength steel plate A517GrF,the minimum yield strength should be above 690Mpa,thickness above 65mm,this value shall be 620Mpa.Tensile strength of high strength steel plate A517 Grade F shall be within 795-930Mpa.The additional technical requirements …

ASTM A517 - SSAB

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

ASME SA517,SA517 Steel - JOIN WIN STEEL - Steel Plate…

ASME SA-517/SA-517M SA517 GR A, SA517 GR B, SA517 GR E, SA517 GR F, SA517 GR J, SA517 GR P need to be done the (Quenching + Tempering ) heat-treatment to meet the property requirement in the standard ASTM SA-517/SA-517M.[PDF]

Plate - usa.arcelormittal

ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical Applications

A514 steel - Wikipedia

A514 is a particular type of high strength steel, which is quenched and tempered alloy steel, with a yield strength of 100,000 psi (100 ksi or approximately 700 MPa).The ArcelorMittal trademarked name is T-1. A514 is primarily used as a structural steel for building construction. A517 is a closely related alloy that is used for the production of high-strength pressure vessels.Specifications·

ASTM A517 Gr 70 Hot rolled steel plate steel plate,ASTM ...

ASTM A517 Gr 70 Hot rolled steel plate is a kind of design for pressure vessel and boiler of the carbon in the alloy. ASTM A517 Gr 70 Hot rolled steel plate is a kind of high strength metal, easy manufacturing, welding can be strong. It also has good corrosion resistance.

ASTM A514 Alloy & Abrasion Resistant Steel Plate | Chapel ...

Alloy & Abrasion Resistant Steel Plate. ASTM A514. ... Mechanical Properties: Tensile: up to 2.5” 110 to 130 ksi over 2.5” to 6” 100 to 130. Yield: ... ASTM A131 A&B / ABS A&B ASTM A131 / ABS AH36 / ABS DH36 / ABS EH36 API 2H Grade 50 ASTM A633. PVQ Steel Plate .

ASTM A517 Specification steel plate/sheet | Products for ...

Under ASTM A517 pressure vessel steel plate specification, the plate thickness determines the grade selection and the mechanical properties. Plates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.