Tel: +86-371-86151827

carbon steel iron sheet

Steel grade:carbon steel iron sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

carbon steel iron sheet Introduction

Carbon Steel versus Cast Iron | Cook's Illustrated

Carbon-steel cookware is often compared with cast iron. While the two materials are very similar, carbon steel actually contains less carbon and more iron. Carbon steel is composed of roughly 99 percent iron to 1 percent carbon, while cast iron normally contains 2 to 3 percent carbon to 97 to 98 percent iron.How To · Carbon-Steel Skillets · We Test It All

What's the Difference Between Cast Iron and Carbon Steel ...

Material

Carbon Steel Sheet - aesteironalloys

Manufacturer of Carbon Steel Sheet - ASTM A794 Gr 1015 Carbon Steel Sheet, ASTM A794 Gr 1017 Carbon Steel Sheet, ASTM A794 Gr 1018 Carbon Steel Sheet and ASTM A794 Gr 1020 Carbon Steel Sheet offered by Aesteiron Steels LLP, Mumbai, Maharashtra.

A closer look at low-carbon sheet steels - The FABRICATOR

thefabricator› Article› Metals/MaterialsSimply put, steel is just iron plus no more than about 2.1 percent carbon. (If the steel has more than 2.1 percent carbon, it’s called cast iron.) With low-carbon steels, the carbon level tops out at around 0.1 percent to 0.2 percent. There is not much else in steel, but what is there is important ...

Carbon Steel Expanded Sheets - Carbon Steel - Grainger ...

Carbon steel is one of the most commonly used materials in the manufacturing, industrial and construction field. Carbon steel expanded metal is a sheet that has been slit and stretched into a solid, non-raveling mesh with diamond-shaped openings. It is available in a galvanized finish to provide corrosion resistance and additional strength.[PDF]

Carbon Steel Alloy Steel - ThyssenKrupp

Carbon Steel Alloy Steel Safety Data Sheet According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations 12/15/2014 EN (English US) 2/19

Spring Steel & Strip Steel Distributor | Precision Steel ...

Precision Steel Warehouse is the industry-leading steel service center. We maintain a large inventory of flat steel, low carbon sheet and strip, shim steel, flat wire, spring steel, stainless steel, and more. Request a quote today!

The Four Types of Steel | Metal Supermarkets

Carbon Steel. Carbon Steel can be segregated into three main categories: Low carbon steel (sometimes known as mild steel); Medium carbon steel; and High carbon steel. Low Carbon Steel (Mild Steel): Typically contain 0.04% to 0.30% carbon content. This is one of the largest groups of Carbon Steel.[PDF]

CARBON STEEL - republicsteel

CARBON STEEL Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Page 2 of 8 2.3. Other hazards Steel products in the solid state present no fire or explosion hazard; however, the particulates generated may present a dust explosion hazard. Steel

A closer look at low-carbon sheet steels - The FABRICATOR

thefabricator› Article› Metals/MaterialsSimply put, steel is just iron plus no more than about 2.1 percent carbon. (If the steel has more than 2.1 percent carbon, it’s called cast iron.) With low-carbon steels, the carbon level tops out at around 0.1 percent to 0.2 percent. There is not much else in steel, but what is there is important ...

Carbon Steel Expanded Sheets - Carbon Steel - Grainger ...

Carbon steel is one of the most commonly used materials in the manufacturing, industrial and construction field. Carbon steel expanded metal is a sheet that has been slit and stretched into a solid, non-raveling mesh with diamond-shaped openings. It is available in a galvanized finish to provide corrosion resistance and additional strength.

Carbon Steel Sheet - texasironandmetal

Texas Iron & Metal is temporarily omitting pricing from our website while we await government decisions regarding tariffs on all imported steel. Any pricing on the site should be disregarded. Call one of our knowledgeable salespeople at 713.672.7595 for current pricing and continued great deals. 713.672.7595 phone; 713.672.0653 fax; 865 ...

The Difference Between Carbon and Stainless Steel | Metal ...

Selecting an appropriate type of steel for a project is one of the most important decisions to make. However, before deciding between individual grades, you first have to decide what type of steel to use, such as carbon steel or stainless steel.To help, this article will discuss the difference between carbon and stainless steel.

CARBON STEEL – Valley Iron, Inc.

Metal products contain chemicals, including nickel, which is known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth …

Love Cast Iron Pans? Then You Should Know About Carbon ...

We've shared a lot of love for cast iron here at Serious Eats, but in our own kitchens there's another very similar type of pan that gets near equal use: carbon steel. Since it's more common in restaurant kitchens than homes, we've been pretty mum on the subject, but today, it's time to talk about what makes this sibling to cast iron great.

Large Carbon Steel Sphere | Large Iron Sphere | SHINY

Assembled Large Carbon Steel Sphere Production Method Assembling. The assembled large carbon steel sphere is made of carbon (mild) steel sheet with assembling method by man-hand. there’re several welding seams on the surface. the welding seams will be grind off and smooth ground surface. Thickness:1mm to 6MM (20GA to 3GA)[PDF]

CARBON STEEL - republicsteel

CARBON STEEL Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Page 2 of 8 2.3. Other hazards Steel products in the solid state present no fire or explosion hazard; however, the particulates generated may present a dust explosion hazard. Steel[PDF]

Introduction to Iron and Steel

Steel: Iron with a bit of carbon in it— generally less than 1%. 4 Introduction to Iron and Steel A few definitions and general descriptions are in order Pig iron: Raw iron, the immediate product of smelting iron ore with coke and limestone in a blast furnace. Pig iron has a very high carbon content, typically 4-5%, which makes it very brittle and[PDF]

MATERIAL SAFETY DATA SHEET STEEL PRODUCTS

PRODUCT NAME: Galvanized Carbon Steel- Pipe, Tube & (708) 339-1610 ... MATERIAL SAFETY DATA SHEET STEEL PRODUCTS Page 2 of 2 ... Chronic inhalation of high concentrations of iron oxide fumes or dusts may lead to a benign pneumoconiosis (siderosis).

Differences between Carbon Steel and Stainless Steel

pearlitesteel› Stainless Steel BlogCarbon steel and stainless steel are both metals that are used in a wide array of commercial and consumer applications. The main difference between the two is in the components that are added to the steel to make it useful for its intended purposes. Carbon steel vs Stainless steel . Alloying Materials. Steel is an alloy made out of iron and ...

What is black iron? - Finishing

A. Black iron pipe, even though thought of as steel, is called as such because steel is an alloy mix of iron & carbon. Technically, the pipes are iron because steel is simply iron w/ hardening agents (alloys) carbon being the primary alloy hardening agent. All steel is iron.

Specialty Products | CMI Specialty Products, Inc.

Specialty Products: CMI-B Ultra-low Carbon Magnetic Iron Strip & Sheet per ASTM A-848-01 CMI-B Ultra-low Carbon Magnetic Iron Precision Cold Rolled

Steel | metallurgy | Britannica

Steel: Steel, alloy of iron and carbon in which the carbon content ranges up to 2 percent (with a higher carbon content, the material is defined as cast iron). By far the most widely used material for building the world’s infrastructure and industries, it is used to fabricate everything from sewing

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.