Tel: +86-371-86151827

s355 steel plate price yield strength

Steel grade:s355 steel plate price yield strength

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s355 steel plate price yield strength Introduction

s355 steel weight Yield Strength - china-steel-suppliers

S355 steel plate is a high-strength low-alloy European standard structural steel covering four of the six categories within the EN 10025: 2004 standard. Structural Steel - BS EN 10025 S355 and S275 Structural Steel Plate, Beams, Columns, Channels, Angles - S275, S355.

Structural Steel: S235, S275, S355 (3) - Yield Strength ...

Yield Strength. The yield strength of structural steel measures the minimum force required to create a permanent deformation in the steel. The naming convention used in European Standard EN10025 refers to the Minimum Yield strength of the steel grade tested at 16mm thick. Tensile Strength.

yield strength of st52 3 - MS Plates - napmr.org

ST52-3 steels is a low alloy, high strength structural steel which can be readily welded to other weldable steel. ST52-3 steel’s Mechanical properties is Yield strength more than 355 MPa, tensile strength . s355 steel carbon content yield strength -- Henan BBN. S275 – a structural grade steel with a minimum yield strength of 275 N/mm².

Structural Steel - S235, S275, S355 Chemical Composition ...

The Mechanical Properties of Structural Steel are fundamental to its classification and hence, application. Even though Chemical Composition is a dominant Factor of the Mechanical Properties of steel, it is also very important to understand the minimum standards for the Mechanical Properties (Performance characteristics) such as; Yield Strength and Tensile Strength.[PDF]

S355 European Standard Steel - joostdevree.nl

S355 EN 10025 : 2004 Standard Structural Steel Plate. S355 structural steel plate is a high-strength low-alloy European standard structural steel covering four of the six "Parts" within the EN 10025 – 2004 standard. With minimum yield of 50,000 KSI, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709.

S355 J2+N Steel Plates Suppliers in India, Buy S355 High ...

steelplates.in› Steel PlatesS355J2+N has minimum yield strength 355 MPa, Tensile 470 to 630 MPa,and the “+N” means normalized when rolling, while J2 means doing charpy V-notch impacting test @ -20 ℃. S355J2+N and S355J2G3 are the similar steel grades as both grades delivery condition are normalized. G3 and N …

Material Properties of S355 Steel - An Overview

Material Properties of S355 Steel - An Overview. S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weldability and machinability, let us see more mechanical details of this steel. ... S355 Yield Strength S355 is named based on it's minimum yield ...

S355 S355J2 S355J2+N Steel - UK Supplier

S355, S355J2, S355JR, S355J2+N steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions.

S355 Structural Steel Plate | Leeco Steel, LLC

leecosteel› …› EN Standard Steel PlateS355 is a non-alloy European standard (EN 10025) structural steel that is high-strength most commonly used after S235. S355 steel covers four of the six categories within the EN 10025: 2004 standard. With minimum yield of 50 ksi, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709.. Careful attention should always be placed on the specific variation of S355 ...

BS EN10025 structural steel plate - S235, S275 and S355 ...

BS EN10025 structural steel plate and equivalent ASTM. HOME > blog. ANSON Steel offers structural steel plate that meets the European standard for structural steel. Structural steel is a standard construction material, made from specific grades of steel and formed in a range of industry standard cross-sectional shapes (or ‘Sections ...

What is the yield strength of Q345B steel plate? - Quora

The dead giveaway that tells you when Amazon has a better price. This tool looks for lower prices at other stores while you shop on Amazon and tells you where to buy. The yield strength or yield point is the property of the material and is defined as the stress at which the material begins to ...[PDF]

Structural Steel Plate and Strip to EN 10025

The grade designations of EN 10025 refer to the minimum yield strength of each grade for thicknesses less than or equal to 16mm. Above 16mm, the yield strength decreases as the thickness increments increase. The steel grade should be selected in accordance with the strength …

s355 steel weight Yield Strength - china-steel-suppliers

Structural Steel - BS EN 10025 S355 and S275. Structural Steel Plate, Beams, Columns, Channels, Angles - S275, S355. S275 – a structural grade steel with a minimum yield strength of 275 N/mm² S355 – a structural grade steel with a minimum yield strength of 355 N/mm²2018-3-19. Material selection and product specification ...

s355 yield strength - srilankasports.org

S355 – a structural grade steel with a minimum yield strength of 355 N/mm² which widely used in the engineering . and construction industries, S355 offers high yield and tensile strength and is supplied with a variety of treatments . and test options to ensure it is a highly usable steel in your various projects.

What is the yield strength of Q345B steel plate? - Quora

The dead giveaway that tells you when Amazon has a better price. This tool looks for lower prices at other stores while you shop on Amazon and tells you where to buy. The yield strength or yield point is the property of the material and is defined as the stress at which the material begins to ...

s355 steel yield strength - srilankasports.org

S355 Steel Plate S355 is a non-alloy European standard (EN 10025) structural steel that is high-strength most commonly used after S235. S355 steel covers four of …

EN 10025-2 S355J0 high strength structural steel plate ...

EN 10025-2 S355J0 high strength structural steel plate ... S275J2, S355JR, S355J0, S355J 2, S355 K 2, S 450J0, S355J0 G3 . S355J0 Steel Plates. S 355 – a structural grade steel with a minimum yield strength of 355 N/mm² which widely used in the engineering and construction industries.

Structural Steel - EN10025 S275, S355JR and S355JO

S355JR steel plate. S355 being widely used in the structural engineering and construction industries, S355 offers high yield and tensile strength and is supplied with a variety of treatments and test options to ensure that it is a highly usable steel in your various projects. S355 structural grade (S) carries minimum yield strength of 355 N/mm²m,...

S355 JR Steel Plate - tritonalloysinc

Triton Alloys Inc. is S355 JR Steel Plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies S355 JR Steel Plate to internationally approved quality standards for applications. S355 JR Steel Plate have excellent quality to …

yield strength of st52-3 - Cold rolled steel plate price

and construction industries, S355 offers high yield and tensile strength and is supplied with a variety of treatments . and test options to ensure it is a highly usable steel in your various projects. EN 10025-2 S355J2G3, S355J2+N High Yield Strength Structural Steel Plate. What is yield strength - Answers

S235, S275 and S355 Structural Steels - AZoM

There are numerous examples of European grades of structural steel such as S195, S235, S275, S355, S420, S460 etc. However, for the purposes of this article, the focus will be on the chemical composition, mechanical properties, and applications of S235, S275, and S355.

15MnNiDR yield strength - MS Plates - napmr.org

12Cr2Mo1R,12Cr1MoVR 16MnDR,15MnNiDR,09MnNiDR HP235,HP265,HP295,HP325,HP345 . China Supplier . china tantalum steel clad plate suppliers . St12 steel plate characteristics yield strength steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. ASTM A36 Mild Steel Sheet / A36 Carbon Steel Plate, View .

best sellers Q345B A572 S355 High strength carbon iron ...

ASTM A572 is a high strength low alloy steel that offers a higher strength than ... carbon-steel plate with a nominal hardness of ... Structural Steel - BS EN 10025 S355 and S275. Structural Steel Plate, Beams, Columns ... S355 steel is a low carbon steel whose specifications offer high yield strength. ... S355 sheet/plate can also be ...

Material Properties of S355 Steel - An Overview

Material Properties of S355 Steel - An Overview. S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weldability and machinability, let us see more mechanical details of this steel. ... S355 Yield Strength S355 is named based on it's minimum yield ...

S355J0 steel plate - BEBON INTERNATIONAL

Structural steel plate S355J0 is carbon_manganese steels with a guaranteed minimum yield strength and tensile strength,and satisfactory ductility.Without any special rolling or heat treatment for S355J0 steel,The abbreviated designation of this delivery condition shall be AR .. S355J0 steel is a more yield and tensile strength steel grade than S235JR and S275JR in 0 degree temperature impact test.[PDF]

Structural Steel Plate and Strip to EN 10025

The grade designations of EN 10025 refer to the minimum yield strength of each grade for thicknesses less than or equal to 16mm. Above 16mm, the yield strength decreases as the thickness increments increase. The steel grade should be selected in accordance with the strength …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.