Tel: +86-371-86151827

c35 steel sheet chemical

Steel grade:c35 steel sheet chemical

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

c35 steel sheet chemical Introduction

C35 - BEBON steel - steel-plate-sheet

C35 steel plate, EN 10083 C35 steel plate, under EN 10083 standard, we can regard C35 steel plate as high carbon steel.. C35 steel plate is one mainly of high carbon steel,the application of EN 10083 C35 steel plate is equal to JIS G4051 S35C,DIN C35,UNI C35,NFA AF55-C35 …

C35 / 1.0501 Non-alloy quality steel - equivalent ...

Non-alloy quality steel Chemical composition of steel C35 (1.0501), Standards of steel C35 (1.0501) Mechanical Properties of steel C35 (1.0501) Equivalent grades of steel C35 (1.0501) Tensile Strength, Elongation, Proof strength, Hardness

c35 steel sheet chemical - MS Plates - napmr.org

c35 steel sheet chemical, steel,Hot sell c35 steel sheet chemical, MS Plates stock in China,China c35 steel sheet chemical, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled c35 steel sheet chemical, MS Plates in stock each month. …

C35 steel

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. C35 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

chemical composition of c35 material

Provides C35 standard specification, C35 datasheet, C35 chemical composition , C35 mechanical properties, technical specifications of C35 steel material properties. C35 performance specifications. I am Joy shen,If you have any requirement for steel, please feel free to contact with me at any time.

C35 datasheet,C35 chemical,C35 heat treatment

Technical specifications of NF standards structure steel C35 datasheet -Chemical compositions, mechanical properties from Steelmaking, ESR melted, Blooming, C35 Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined.[PDF]

Datasheet for Steel Grades Carbon Steel C35

This page is mainly introduced the C35 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of C35,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

C35

C35 is a medium Carbon steel, one of the most widely used for machinery parts. Exellent forgeability. Special variants ca be made avaiable for cold drawing. Due to the carbon content preheating and postheating are required when welding. Wide range of mechanical properties can be attained by quenching and tempering. Similar designations[PDF]

DIN 17200 C35 steel plate - steel-plate-sheet

shipbuilding-steel steel-plate-sheet DIN 17200 C35 steel plate high carbon steel C35 steel plate, DIN 17200 C35 steel plate, under DIN 17200 standard, we can regard C35 steel plate as high carbon steel . C35 steel plate is one mainly of high carbon steel, the application of DIN 17200 C35 steel plate is equal to JIS

C35 Steel - Special Steel

Carbon steel strip and spring steel sheet is available most commonly in the hardened and tempered condition, though certain sizes are available in the annealed condition. Round and flat bar is stocked in the as rolled condition. Most spring steel specifications are held to British Standard steel specifications including BS1449 & BS970.

c35 chemical and mechanical properties - MS Plates

Anyway, if you want to find c35 chemical and mechanical properties, MS Plates plate/sheet bar supplier, c35 chemical and mechanical properties, MS Plates plate/sheet bar manufacturer, c35 chemical and mechanical properties, MS Plates plate/sheet bar exporter, please contact steel's sales team.[PDF]

Material specification sheet Saarstahl - C35

Material specification sheet Saarstahl - C35 Material No.: 1.0501 Former brand name: International steel grades: BS: C35, 40CS, 080M36 AFNOR: C35, AF55C35, 1C35 SAE: 1035 Material group: Steel for quenching and tempering according to DIN EN 10083 C Si Mn P S Cr Mo Ni Cr+Mo+ Chemical Ni composition: (Typical analysis in %) 0,32 0,39 <0,40 0,50 0,80

c35 chemical composition - hopkinsplasticsurgery

St 50-2 steel plate - BEBON INTERNATIONAL. 2018-11-29 · DIN ST 50-2 steel plate/sheet for general Construction steels ST 50-2 steel plate/sheet, DIN 17100 ST 50-2 steel plate/sheet, under DIN standard, we can regard ST 50-2 steel plate/sheet for general Construction steels.DIN 17100 ST 50-2 steel plate/sheet is for general Construction steels.The followings are the chemical composition and ...

chemical composition of c35 material - gmatindia.in

Provides C35 standard specification, C35 datasheet, C35 chemical composition , C35 mechanical properties, technical specifications of C35 steel material properties. C35 performance specifications. I am Joy shen,If you have any requirement for steel, please feel free to contact with me at any time.

C35 Steel Sheet Price - alibaba

C35 Steel Sheet Price , Find Complete Details about C35 Steel Sheet Price,C35 Steel Sheet Price,Cold Rolled Steel Sheet,Best Price Cold Rolled Steel Sheet from Steel Sheets Supplier or Manufacturer-Wenzhou Jinhe Special Material Manufacture Co., Ltd.

35 / 35 High quality structural carbon steel

35 ( 35 ) - High quality structural carbon steel: chemical composition, mechanical and physical properties, hardness Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

steel plate / sheet,S50C carbon steel plates,Corten A,B ...

Supply S50C carbon steel plates,Corten A,B steel,ASME SA-299/SA-299M C-Mn-Si steel plates,ASME SA-841/SA-841M TMCP steel,ASME SA-562/SA-562M C-Mn-Ti steel. ... What's the chemical composition of ASME SA517 Grade E steel plates? What's the chemical composition of ASME SA517 Grade B steel plates?

AISI 302 Stainless Steel Sheet & Strip | Peninsula Spring

Peninsula Spring is a leading provider of high quality AISI 302 stainless sheet & strip for your project needs. Our annealed stainless steel material provides many beneficial features. Contact us for more information on our advanced quality 302 stainless steel sheet & strip, or request a quote today.

C45 / 1.0503 Non-alloy quality steel - equivalent ...

Non-alloy quality steel Chemical composition of steel C45 (1.0503), Standards of steel C45 (1.0503) Mechanical Properties of steel C45 (1.0503) Equivalent grades of steel C45 (1.0503) Tensile Strength, Elongation, Proof strength, Hardness

C35 Steel plate,C35 Steel pipe - Steel Exporter BeBon China

Steel pipe, Under EN 10250-2 standard,C35 steel pipe, we can regard C35 steel pipe as high carbon steel.. C35 steel pipe is one mainly of high carbon steel,the application of EN EN 10250-2 steel is equal to JIS G4051 S35C,DIN C35,UNI C35,NFA AF55-C35 ,UNE36011 C35K and AISI 1035.

Carbon Steel Plates - C45 Plate Manufacturer from Mumbai

Manufacturer of Carbon Steel Plates - C45 Plate, C20, C45, C50, C60, C35, C35K, C40 Steel Plate, C50 Steel Plate and ASTM A36 Steel Plate offered by Sterlite Metal Industries, Mumbai, Maharashtra.

c 35 chemical composition - natural-elements-online

C35 Chemical Composition, C35 Mechanical Properties, C35 ...It mainly introduce the chemical composition,mechanical properties, heat treatment, processing performance and performance standards about C35.For various specification of steel production and processing to provide the standard production,we have the professional experience for C35.We can also produce it according to the AISI, …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.