Tel: +86-371-86151827

professional hot rolled carbon steel sheet steels

Steel grade:professional hot rolled carbon steel sheet steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

professional hot rolled carbon steel sheet steels Introduction

[PDF]

HOT ROLLED - aksteel

customer specifications for hot bands, hot rolled sheet coils, cut- and mill-edge coils, plus cut lengths ... all AK Steel Hot Rolled Steels. Finally, pickling can be used to remove the oxide ... AK Steel is a leading producer of flat-rolled carbon, stainless and electrical steel products, primarily for the automotive, infrastructure and ...

Carbon Steel Hot Rolled Steel Plate

Hot Rolled Carbon – Olympic Steel Olympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ...

professional hot rolled steel coil in steel sheets steels

Structural Steel Sheet and Coil . This specification covers the general requirements for steel sheet in coils and cut lengths. It applies to the following specifications that describe carbon steel and high-strength, low-alloy steel (HSLA) furnished as hot-rolled sheet and cold-rolled sheet Specifications A 414/A 414M, A 424, A 606, A 659/A 659M, A 794, A 1008/A 1008M, and A 1011/A 1011M.

Structural Steel Sheet and Coil - ASTM A568 Specification

ASTM A568 Scope: This specification covers the general requirements for steel sheet in coils and cut lengths. It applies to the following specifications that describe carbon steel and high-strength, low-alloy steel (HSLA) furnished as hot-rolled sheet and cold-rolled sheet: Specifications A 414/A 414M, A 424, A 606, A 659/A 659M, A 794, A 1008/A 1008M, and A 1011/A 1011M.[PDF]

Steel Plate & Sheet - alro

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

Sheet | Liebovich Steel & Aluminum Company

Hot-rolled carbon steel alloy sheet that exhibits high strength and high formability. A606: Corrosion resistant. High strength steel. Excellent for welding, riveting, or bolting. AR-MED: High strength, low-alloy steel. Abrasion resistant. Made in the as-rolled condition. HSLA GR50: Medium carbon steel that can be forged satisfactorily.

carbon steel plate hot rolled carbon steel sheets

Hot Rolled Carbon – Olympic SteelHot Rolled Carbon Steel Products. Olympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ASTM and AISI standards, as well as branded products ...

Hot Rolled Carbon – Olympic Steel

olysteel› ProductsOlympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ASTM and AISI standards, as well as branded products COR-TEN®, DOMEX ™, EX-TEN®, FREMAX® steel products and more.

Hot Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsAlliance Steel’s hot rolled steel sheet & coil service capabilities include slitting, shearing, blanking, stretcher leveling, degreasing and brushing and metallurgical support. Hot rolled steel products will scale when in contact with oxygen and water vapor after the forming process.

Difference Between Hot and Cold Rolled Steel | Metal ...

Customers often ask us about the differences between hot rolled steel and cold rolled steel.There are some fundamental differences between these two types of metal.The differences between hot rolled steel and cold rolled steel relates to the way these metals are processed at the mill, and not the product specification or grade.

Spring Steel & Strip Steel Distributor | Precision Steel ...

Precision Steel Warehouse, Inc is an ISO 9001:2015 certified steel service center, founded in 1940. Its products include low carbon sheet and strip, shim steel, flat wire, electrolytic tin plate, electro and hot dipped galvanized, galvannealed, high carbon spring steel, stainless steel, and some copper base alloys, including phosphor bronze and brass strips.

Carbon Steel - Loftis Steel & Aluminum, Inc.

The term “carbon steel” may also be used in reference to steel which is not stainless steel; in this use carbon steel may include alloy steels. As the carbon content rises, steel has the ability to become harder and stronger through heat treating, but this also makes it less ductile.[PDF]

IS 1079 (2009): Hot Rolled Carbon Steel Sheet and Strip

3.2 Hot rolled carbon steel sheets and strips shall be. IS 1079 : 2009 Table 1 Chemical Composition (Clauses 6.1 and 6.2) NOTES 1 Steels of these grades can be supplied with the addition of micro-alloying elements like Boron, Titanium, Niobium

Steel Dynamics, Inc. - Flat Roll

Carbon steel sheet is SDI’s primary steel product, with our Flat Roll Group having a combined production capacity of 11 million tons annually. We produce hot roll coils (HRC) in a variety of gauges and grades, and have capabilities to finish and coat our steel sheets to meet our customers’ needs.

Hot rolled steel products, Carbon steel sheet, Corten ...

HR Coils & Sheets; MS Structurals; Raw Material; Company History. Mehta Steels was founded in the year 1992 by Mr.K.B. Mehta who started his Career in year 1969 as a key operations personnel in M/s. D.K Traders of Bhilai, due to his Dedication, Hard work, Strong Value System and sound knowledge of steel product and customers need he was offered ...

Hot Rolled Carbon Steel | Carbon Steel Types from AK Steel

Hot Rolled Steel. Our hot rolled steels are produced to meet the chemistry and dimensional requirements of our customers. Consistency from coil to coil is maintained by applying ladle metallurgy and continuous casting to molten steel, and rolling on a hot …

Products — Camden Yards Steel Company

Camden Yards Steel Company buys prime domestic steel and imports prime foreign steel that it processes to make carbon steel sheets, plates and coils for sale and distribution to manufacturers and other smaller service centers that produce lighting fixtures, truck and trailer parts, cabinets and furniture, tools and dies and many other products.

Professional astm a36 hot rolled steel plate - tomcast.in

ASTM A36 Carbon Structural Steel Plate Specification. ASTM A36 steel plate is the most widely used hot-rolled steel product. As a kind of carbon structural steel product, its relative products are round rod steel, angle bar, and steel sections such as I-Beams, H-beams, angles, and channels.

Cold Rolled Carbon Steel | Carbon Steel Types from AK Steel

Cold Rolled Steel. Cold rolled steels provide excellent thickness and flatness tolerances, surface finish, and press formability. We manufacture low and ultra-low carbon grades to meet a variety of customer formability requirements, specified strength levels, and dent resistance requirements.

J1392A: Steel, High Strength, Hot Rolled Sheet and Strip ...

This SAE Recommended Practice covers seven levels of high strength carbon and low-alloy hot rolled sheet and strip, cold rolled sheet, and coated sheet steels. The strength is achieved through chemical composition and special processing.

What’s the Difference Between Hot and Cold Rolled Steel ...

Steels of different grades and specifications can be either hot rolled or cold rolled—including basic carbon and other alloy steels. Hot Rolled Steel. ... Stacks of hot rolled steel sheets.

Carbon Steel - Flat Rolled

Cold Rolled Carbon Steel. Cold rolled product is produced from hot rolled processed sheet on tandem cold reduction mills to the desired customer thickness. The annealing process is capable of producing drawing steel, deep drawing and extra deep drawing steel. Product can be ordered to minimum or nominal thicknesses.

Hot Rolled vs Cold Rolled Steel | Metal Casting Blog

Hot rolled steel and cold rolled steel are made using similar processing methods, but they have different qualities. ... Steels of different grades and specifications can be either hot rolled or cold rolled—including both basic carbon steels and other alloy ... For sheet metal, rolled steel is spun into coils and left to cool. For other forms ...

Carbon Steel Bar - Mielemetal

Hot Products. hot rolled seamless steel tube; high quality carbon structural steels s45c round steel bar; 310S stainless steel plate weakens slightly; ER1100 aluminum welding wire; C22E 1.1151 galvanized steel wire; 932usd per ton high quality Q550E high strength plate/sheet; Carbon Steel Round Bar SAE1018,1020,1035,1045,1050,1055,1060

Carbon Steel Products From Beams To Hot And Cold Rolled Sheets

Carbon Steel. A steel whose properties are determined primarily by the amount of carbon present. These steels rely on the carbon content for their structure. Apart from iron and carbon, manganese up to 1.5% may be present as well as residual amounts of alloying elements such as nickel, chromium, molybdenum, etc.

The Four Types of Steel | Metal Supermarkets

Medium Carbon Steel: Typically has a carbon range of 0.31% to 0.60%, and a manganese content ranging from .060% to 1.65%. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment. High Carbon Steel: Commonly known as “carbon ...

Cold Rolled Carbon – Olympic Steel

olysteel› ProductsHome / Products / Cold Rolled Carbon Cold Rolled Steel Products We commonly stock commercial quality (CQ), AHSS Advanced high strength steel, drawing steel (DQ), COR-TEN® weathering steel, 1/4 Hard and 1/2 Hard, automotive grades, and more cold rolled steel coil and sheet products.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.