Tel: +86-371-86151827

a516 steel plate specs

Steel grade:a516 steel plate specs

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a516 steel plate specs Introduction

Asme sa516 grade 70|sa516 grade 60 steel plate specification

Asme sa516 grade 70|sa516 grade 60 steel plate specification. ASTM/ASME SA516 Carbon Steel Plate for Pressure Vessels: ASTM/ASME SA516 specification covers carbon steel plates produced mainly for application in welded pressure vessels where improved notch toughness is important. Tensile strength range is from 55 - 90 MPa and its versatility makes this specifications very popular in application.

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 Steel Plate. A516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important. Plates 1.50” and under in thickness are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. Plates over 1.50” in thickness shall be normalized.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

Standard Specification for Pressure Vessel Plates, Carbon ...

ADD TO CART. This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70.

A516 Heavy Steel Plate - PVQ A516 Steel Plate | Leeco ...

leecosteel› Steel Plate Products› Heavy Steel PlateA516 heavy steel plate, also known as PVQ516 steel plate, is carbon steel with specifications for pressure vessel plates and moderate or lower temperature service. A416 heavy steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important.

Steel Plate Grades - Continental Steel & Tube Company

ASTM A36 PLATE STEEL is a structural quality product designed for use in welded, bolted, or riveted fabrications such as oil rigs, buildings and bridges.Produced with a min. yield of 36,000 psi, A36 plate can be used in the construction of a variety of lightweight structures and equipment where good welding properties are important.

ASME SA516 / ASTM A516 - Gr. 70 - Brown McFarlane

About ASME SA516 Grade 70 and ASTM A516 Grade 70. The A516 / SA516 standard, its full name is “Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service”, could almost be described as the default material specification for pressure vessel applications particularly outside...

Carbon Plate- ASTM A 516 - Oliver Steel Plate

Carbon Plate- ASTM A 516 Standard specification for Pressure Vessel Plates Carbon Steel, for Moderate and Lower Tempeature Service. First issued in 1964. This specification covers carbon steel plates intended primarily for use in welded pressure vessels …[PDF]

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON …

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE SA-516/SA-516M (Identical with ASTM Speci cation A 516/A 516M-06) 1. Scope 1.1 This speci cation covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important.

ASTM A516/ ASME SA516 PVQ Steel Plate | BBN Steel

SA516 is a carbon steel plate grade utilized primarily in welded pressure vessels for moderate to lower temperature service. This material is produced in grades 55, 60, 65 and 70. This material is also offered in the normalized condition where improved notch toughness is required.[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;

A516 | CARBON | In Stock | Castle Metals Site

Carbon A516 (ASTM A516, ASME SA 516) is a pressure vessel quality (PVQ) steel plate conforming to ASTM A516-70. When normalized above 1-1/2¿ thick, it has improved impact toughness. A516 plate is one of the strongest and most versatile PVQ plates commercially available.

Carbon Plate- ASTM A 516 - Oliver Steel Plate

Carbon Plate- ASTM A 516 Standard specification for Pressure Vessel Plates Carbon Steel, for Moderate and Lower Tempeature Service. Plates over 1-1/2” thick must be normalized. Additionally, when impact (notch toughness) tests are required on plates up to 1-1/2” thick, the plates must be normalized. General requirements for delivery Material shall conform to the requirements of ASTM A 20.

ASTM A516 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A516. The ASTM A516 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service for plates used in pressure vessel applications where excellent notch toughness is required. Four grades having minimum Tensile Strengths ranging of 55 ksi to 70 ksi are available.[PDF]

Plate to ASTM A516 - ArcelorMittal South Africa

General description ASTM A516 is the most commonly used specification of the American Society of Testing and Materials (ASTM) for pressure vessel plate. It is used for pressure vessel plates for moderate and lower temperature service where improved notch toughness is important.

Steel Plate - EVRAZ North America

EVRAZ Regina and Portland collectively produce over 500 grades and specifications of steel plate and is known for its ability to provide products and services …

API 5L & 5CT, ASTM A36, A283, A516, A572, A573 Steel Plate

Octalsteel supplies API 5L & 5CT, ASTM A36, A283, A516, A537, A572, A573, carbon and alloy steel plate with best price from China manufacturers.

MetalsDepot® - A516 PVQ Plate | Pressure Vessel Plate ...

A516 PVQ Plate - Pressure Vessel Quality. A516-70 PVQ Steel Plate aka Pressure Vessel Quality steel plate is designed primarily for use in welded pressure vessels where notch toughness or crack resistance is required. A516 Grade 70 is the most common high strength steel plate used in the construction of boilers and pressure containment fabrication...

ASME SA516 GRADE 70 | ASTM A516 Grade 70 - …

The A516 / SA516 standard, its full name is “Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service”, is widely used by designers and engineers in many market sectors particularly outside of Europe.[PDF]

A516 and A387 Pressure Vessel Steels: A Technical …

ity, refer to our Plate Steel Specification Guide. Two pressure vessel plate steel specifications comprise, by far, the most popular process vessel applications. Based on ArcelorMittal’s experience, ASME SA516 (ASTM A516) carbon steel and ASME SA387 (ASTM A387) alloy steel are detailed technically in this bro-chure. Production Practices

S355J2,S35J2G3,S355JR,S235JR Stock Steel Plate-Steel AH36 ...

Gangsteel also could supply steel plate in standard adopt of JIS, ASTM, ASTME,DIN, EN, API,BS,ISO and GB. Gangsteel have two large warehouse in shanghai and jiangsu which contain about 26500mt steel plate and steel coil in carbon steel, alloy steel, ship steel plates.

A514 steel - Wikipedia

A514 steel. A514 is a particular type of high strength steel, which is quenched and tempered alloy steel, with a yield strength of 100,000 psi (100 ksi or approximately 700 MPa ). The ArcelorMittal trademarked name is T-1. A514 is primarily used as a structural steel for building construction.Specifications·

ASTM A517 - SSAB - SSAB high-strength steel - sheet, plate ...

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

ASTM A516 Gr55/60/65/70 carbon steel plates for pressure ...

This specification of ASTM A516 covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The most common is …

ASTM A516 Grade 70 Carbon Steel Plates ... - ganpatind

Stockist and Supplier of ASTM A516 Grade 70 Carbon Steel Sheets, ASTM A516 Grade 70 Carbon Steel Circle, ASTM A516 Grade 70 Shim Sheet, Huge stock of standard ASTM A516 Grade 70 Polished Plate is in ready stock

Forging a516 70 steel plate specifications - A36 steel ...

BBN offer A36 steel stock Forging Low-carbon steel,hot sell Forging a516 70 steel plate specifications ,SA36,A283,A572 steel,offer all kinds of Forging Low-carbon steel stock in China.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.