Tel: +86-371-86151827

a516gr70 a516 grade 70 a516 70 boiler steel plate

Steel grade:a516gr70 a516 grade 70 a516 70 boiler steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a516gr70 a516 grade 70 a516 70 boiler steel plate Introduction

ASTM A516 Grade 70(A516GR70) Pressure Vessel And Boiler ...

Any request for ASTM A516 Grade 70(A516GR70) Pressure Vessel And Boiler Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.Masteel UK Ltd · Azom Admin

ASME SA516 GRADE 70 | ASTM A516 Grade 70 - …

Prosaic Steel and Alloys have high Quality Inventory of SA516 Grade 70 Plate, SA516 Grade 70 Plate, SA516 Grade 70 Plate, SA516 Grade 70 Plate, SA516 Grade 70 Plate Ex Stock, SA516 Grade 70 Plate, ASME SA516 Grade 70, ASME 516 Grade 70, SA516 Boiler Plate, SA516 Grade 70 Boer Plate, Boiler Quality Steel plate, BQ Plate, Pressure Vessel Plate, SA516 Steel Plate, SA516 Grade 70 Steel Plate.

A516Gr70 steel plate - steel plates - BEBON INTERNATIONAL

ASTM A516 Gr 70 steel plate/sheet,ASTM A516 Gr 70 steel plate/sheet, under ASTM standard, we can regard A516 Gr 70 steel plate/sheet for simple pressure vessels steel.. ASTM A516 Gr 70 /ASME SA516 Gr 70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels and industrial boilers.ASTM A516 Gr 70 ...

ASTM A516 Grade 55|Grade 60|Grade 70 Pressure Vessel …

ASTM A516 specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, plate products are available in four grades: Grades 55, 60, 65, and 70.

A516 Grade 70,A516Gr70---Xinsteel

A516 Grade 70 boiler steel plates are mainly used in welded pressure vessels where improved notch toughness is important.Generally As rolled is ok for rolling pressure vessel steel plate A516Gr70,however,for improve steel property and toughness,Xinsteel engineers suggest the end users accept rolling A516 Grade 70 steel plates under Normalized,especially for the steel plates thickness …

ASTM A516 Grade 70|A516Gr.70|A516GR70|SA516GR70 Steel …

ASTM A516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service.. ASTM A516 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both.

ASTM A516 Grade 70(A516GR70) Pressure Vessel And Boiler ...

Any request for ASTM A516 Grade 70(A516GR70) Pressure Vessel And Boiler Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

ASTM A516 Grade 70(A516GR70) Pressure Vessel And Boiler ...

ASTM A516 Grade 70(A516GR70) Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project.

A516 Grade 70 N,NACE A516Gr70 HIC boiler steel plate- …

Normalised A516 Grade 70 boiler steel plates are mainly used in welded pressure vessels where improved notch toughness is important.Generally As rolled is ok for rolling pressure vessel steel plate A516Gr70,however,for improve steel property and toughness,Xinsteel engineers suggest the end users accept rolling A516 Grade 70 steel plates under Normalized,especially for the steel plates ...

A516 Grade 70 Boiler steel plate, A516 Boiler steel ...

A516 Grade 70 Boiler steel plate is a medium carbon alloy designed for use in pressure vessels and boilers.It contains manganese, phosphorus, sulfur and silicon at the highest levels allowed by the ASTM, to produce the strongest carbon steel plates specified by the ASTM.

ASTM A516 Grade 55|Grade 60|Grade 70 Pressure Vessel Steel …

ASTM A516 specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, plate products are available in four grades: Grades 55, 60, 65, and 70.

A516/A516M Grade 60, 65, 70 Steel Plate Suppliers - Buy …

steelplates.in› Alloy Steel Plate ProductsA516/A516M Grade 60, 65, 70 Steel Plates Suppliers – Call Us Now! “Yes, It’s in Stock and Ready to Deliver” High Quality, Lower Cost But The Best Service in A516 Grade Steel Plates An ISO 9001:2008 Certified Company, Metline Industries is recognized stockholder, distributor and supplier of A516/A516M Grade 60, 65, 70 plates in India and worldwide.

SA516 Gr 70 Carbon Steel Boiler Plate Suppliers and ...

Champak steel is a exporters and Stockholders of ASME SA 516 Gr 70 Plates, SA516 Gr.70 Carbon Steel Plate, ASTM A516 Grade 70 pressure vessels Plates, A516 Gr.70 Boiler Steel Plate, A516 Grade 70 Welded Steel Plates

ASTM A516 Grade 70 Carbon Steel Plates Manufacturer in …

Superior Steel Oveseas is highly acclaimed manufacturer, supplier & exporter of ASTM A516 GR.70 Plates.We supply high quality Carbon Steel ASME SA516 GR.70 Plates for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry. ASTM A516 Grade 70 Plate is an excellent choice for service in lower than ambient temperature ...

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateLeeco Steel distributes A516 steel plates that are intended primarily for service in welded pressure vessels where improved notch toughness is important. A516 steel plates may be ordered normalized or stress relieved, or both. A516 plates over 1.50” in thickness shall be normalized. We offer various thicknesses, lengths, and widths to meet your specifications.

ASTM A516 Grade 70|ASTM A516GR.70 steel plate - …

A 516 Grade 70 steel grade is an advantage Gangsteel Company, we exported the super thickness steel plate max 135mm in A 516 Gr.70 to Singapore in the best quality. One of our boss is the sales department manager of mill to promise the competitive price and the fastest delivery time to your projects.

ASTM A516 Gr55/60/65/70 carbon steel plates for pressure ...

This specification of ASTM A516 covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The most common is Grade 70 or called out A516-70.

ASTM A516 Grade 60 Boiler Plate Steel | Murray Steel …

ASTM A516 Grade 60 Boiler Plate Steel is available in a full range of sizes and thicknesses from Murray Steel Products, along with associated processing services, including profiling, cutting and drilling.

a516 grade 70 - MS Plates - napmr.org

A516 Grade 70 boiler steel plates are mainly used in welded pressure vessels where improved notch toughness is important.Generally As rolled is ok for rolling pressure vessel steel plate A516Gr70,however,for improve steel property and toughness,Xinsteel engineers suggest the end users accept rolling A516 Grade 70 steel plates under Normalized ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.