Tel: +86-371-86151827

aisi 4130 alloy steel plate 10

Steel grade:aisi 4130 alloy steel plate 10

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aisi 4130 alloy steel plate 10 Introduction

AISI 4130 Steel | 25CrMo4 | 1.7218 | 708A25 | SCM430 ...

AISI/SAE 4130 steel grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength up to around 315º C (600º F). It shows good overall combinations of strength, toughness and fatigue strength. As one of leading supplier of 4130 steel alloy material, Otai is reliable in 4130 round bar and steel plate materials.

AISI 4130 Alloy Steel (UNS G41300) - Material Science

AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has low carbon content, and hence it can be welded easily. The datasheet given below provides more details about AISI 4130 alloy steel. Chemical Composition. The chemical composition of AISI 4130 alloy steel is listed in the following table.

4130 (E4130) Alloy Steel, AISI 4130 (E4130), Sheet, Plate ...

AISI 4130 Aircraft Quality Steel Cut to Size and Delivered Quickly. With the largest stocked inventory of aircraft quality steel, Benedict-Miller delivers the best chromoly 4130 (E4130) alloy steel sheet, plate, or round bar cut and finished to your specifications when you need it. Call 1-908-497-1477 to speak with a knowledgeable, friendly AQ ...

Alloy Steel 4130 - Continental Steel & Tube Company

Alloy Steel 4130, also referred to as Chromoly Steel and SAE/AISI 4130, is a chromium and molybdenum alloy steel. Known for its responsiveness to mechanical and heat treatments, Alloy Steel 4130 is weldable by most commercially popular methods. Cold working is possible and forming often takes place in the annealed condition.

AISI 4130 Alloy Steel - 4130 Steel Forgings | All Metals ...

General Characteristics of

23568 | 4130 | 4130 | ALLOY | Metals | Castle Metals Site

Alloy 4130 in bar, plate & tube SPECIFICATIONS: GRADE ALLOY 4130, AISI 4130, UNS G41300. Castle Metals stocks a wide range of Alloy 4130 in bar distributed globally from our distribution centers in North America, as well as in the U.K, France, Singapore, and Shanghai.

4130 Alloy steel - Special steel china supplier-OTAI ...

Form of Supply. AISI 4130 Alloy steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. AISI 4130 steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces. 4130 alloy steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes.

ASTM A829 AISI 4130/AISI 4140 Alloy & Abrasion Resistant ...

ASTM A829 AISI 4130/AISI 4140 grades have a high fatigue strength and are also abrasion and impact resistant. ... Alloy & Abrasion Resistant Steel Plate. ASTM A829 AISI 4130/AISI 4140. A chromium – molybdenum alloy structural steel with great through hardening properties and excellent toughness. These grades have a high fatigue strength and ...

AISI 4130 Aircraft Steel (AMS 6345 / AMS 6346 / AMS 6350)

Alloy 4130 (AISI 4130) is a chromium molybdenum alloy steel. Alloy 4130 is a widely used Aircraft Steel due to its weldability, ease of fabrication and mild hardenability. The hardenability and weldability of Alloy 4130 are considered equivalent to 8630 (MIL-S-6250) .

4130 | ALLOY | In Stock | Castle Metals Site

Alloy 4130 in bar, plate & tube SPECIFICATIONS: GRADE ALLOY 4130, AISI 4130, UNS G41300 Castle Metals stocks a wide range of Alloy 4130 in bar distributed globally from our distribution centers in North America, as well as in the U.K, France, Singapore, and Shanghai. When customers call us for 4130, sometimes they also share how they struggle with price volatility.

Alloy Steel 4130 / Aircraft Steel 4130 / AISI 4130

Alloy 4130 (AISI 4130) is a chromium molybdenum alloy steel. Alloy 4130 is a widely used Aircraft Steel due to its weldability, ease of fabrication and mild hardenability. The hardenability and weldability of Alloy 4130 are considered equivalent to 8630 (MIL-S-6250) .

AISI 4340 (E4340) per AMS 6359 - Plate - benedict-miller

Aircraft Quality 4340 per 6359 Hot Rolled Plate. SAE 4340 Chromoly steel is ideal for parts requiring critical harden-ability and high strength metal. For example, gears and aircraft parts which operate under highly stressed, severe conditions perform exceptionally when made from 4340 AQ metal. ... AQ Steel. 4130 (E4130) Alloy Steel. AISI 4130 ...

AISI 4130 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 4130 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

AISI 4140 Steel Bar - Otai Special Steel

AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist and Exporter. AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications.Similar to alloy grade AISI 4130 chrome moly alloy steel but with a slightly higher carbon content.

4130 | ALLOY | In Stock | Castle Metals Site

Alloy 4130 in bar, plate & tube SPECIFICATIONS: GRADE ALLOY 4130, AISI 4130, UNS G41300 Castle Metals stocks a wide range of Alloy 4130 in bar distributed globally from our distribution centers in North America, as well as in the U.K, France, Singapore, and Shanghai. When customers call us for 4130, sometimes they also share how they struggle with price volatility.

Aisi 4130 Alloy Steel Plate - gmatindia.in

4130 (E4130) Alloy Steel, AISI 4130 (E4130), Sheet, Plate ...Aircraft quality 4130 alloy steel is a medium carbon, low alloy steel containing 0.15/0.25% molybdenum and 0.80/1.10% chromium as strengthening agents. This type of steel is also commonly referred to as a chromoly steel, or chrome moly steel.

AISI/SAE 4130 datasheet,AISI/SAE 4130 chemical,AISI/SAE ...

Technical specification of SAE/AISI/UNS system standard alloy structural steel AISI 4130 data sheet, SAE 4130 Chemical compositions, AISI 4130 Mechanical property from Steelmaking, ESR melted, Blooming, Hot forging,Hot rolling,Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining.

AISI 4130 Steel /25CrMo4 /1.7218 /708A25 /SCM43 - China ...

AISI 4130 alloy steel is a medium carbon, low alloy steel in ASTM A29 standard. ASTM 4140 steel is also commonly referred to as a chromoly steel, or chrome moly steel, containing nominally 0.28-0.33% Carbon, 0.8-1.1% Chromium and 0.15-0.25% Molybdenum.[PDF]

4130 Alloy Steel | 1.7218 | 25CrMo4 | P280GH | 2244 ...

AISI 4130 Steel is a Alloy Structural Steel belong to ASTM A29/A29M Steel Grade standard. AISI 4130 used in Oil and Gas industry and Large Machinery Structural. 4130 Steel China Supplier and factory Otai Special Steel Supply 4130 steel in Round bar, Plate, Flat bar,

Alloy Steel 4130 / Aircraft Steel 4130 / AISI 4130

Alloy 4130 (AISI 4130) is a chromium molybdenum alloy steel. Alloy 4130 is a widely used Aircraft Steel due to its weldability, ease of fabrication and mild hardenability. The hardenability and weldability of Alloy 4130 are considered equivalent to 8630 (MIL-S-6250) .

4130 Alloy Steel Plate, 4130 Alloy Steel Plate Suppliers ...

Alibaba offers 290 4130 alloy steel plate products. About 43% of these are steel sheets. A wide variety of 4130 alloy steel plate options are available to you, such as gb, aisi, and astm.

Alloy 4130 Steel Suppliers - ThomasNet

thomasnet› Supplier DiscoveryDistributor of 4130 Chromium-Molybdenum alloy steel in plate, sheet, and bar forms. Available in hot and cold-rolled. Specifications include 18 x 72 in. to 72 x 144 in. size, 0.025 to 4 in. thickness, 1/2 to 4 1/2 in. bar diameter, and 10 to 12 in. ft. bar random length.

alloy steel sae 4130 - hopkinsplasticsurgery

AISI 4130 Alloy Steel - 4130 Steel Forgings | All Metals ...AISI or SAE 4130 grade is a low-alloy steel containing chromium and molybdenum as strengthening agents. The steel has good strength and toughness, weldability and machinability. AISI/SAE 4130 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength.

AISI 4140 Alloy Steel Plate Suppliers and Manufacturers ...

Find aisi 4140 alloy steel plate here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.[PDF]

AISI 4130 Alloy Steel - Delivered Nationwide by West ...

AISI 4130 Alloy Steel AISI 4130 steel stockholders and suppliers, delivering to the whole of the UK. AISI 4130 is a chromium molybdenum alloy steel specification. It is supplied as round bar commonly in the hardened and tempered condition with a hardness of 18-22 HRc. With a lower carbon content range AISI 4130 provides better

AISI 4130 45 Deg Long Radius Elbow |SAE 4130| AISI 4130 ...

AISI 4130 Alloy Steel (UNS G41300) Integrating fittings into piping systems is a various important task. After all, it’s at the connections between pipes where the system is most susceptible to leaks and failure. As such, many pipe fitting connection methods require special training to be executed. From soldering, to threading to brazing ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.